[Ross]

Mine does, but I only use one at a time.

[Ross]

I sm not a fan of multiple purpose machines. It just seems to me that neither function is as good as they are on a single function machine. I do realize that cost can be more than double that of the dual function machines.

[Ross]

I used schedule 80 cpvc drain pipe. At least I think 80, maybe 40. It was the heavy duty one. I ran bare copper wire inside and wrapped bare copper wire on the outside to eliminate static charge which could cause a dust explosion. I had so many clogs inside, I removed the inside wire. That was about 15 years ago, no problems since. The outside wire is attached to every machine also.

[Ross]

Mine is Jet with top 2 micron canister and down bag below. Somewhat difficult to reinstall bag due to steel band drops down when trying to clamp.

[Ross]

The rack in the upper left corner are available from ROCKLER. I installed 6 of them in a woodworker club’s shop in Arizona. They are pricey, but very heavy duty steel.

[Ross]

I don’t know what happened to the picture I had in this post, but if you look at my photos in Midwest group the one of the bandsaw, shows the rack that holds 12 clamps.

[Ross]

Thanks for the information. I’ll see what I can find.

[Ross]

I have the magnets. Next bag charge, I’ll give it a try. Thanks for the suggestion.

[Ross]

Wish my jointer was that wide, but I do have a planer, also. I probably wouldn’t have room for it. My shop is full. No one ever builds a big enough shop.

[Ross]

I will look into them. Thank you.

[Ross]

Thanks for reply Klockit use to have the plan, but it is no longer available. In 2000, I built a tall clock some call them grandfather clocks. I used a Klockit set of plans that were excellent 16 D size drawings. Also, bought the works from them. I searched via Amazon and Google, but nothing came up that fit. If I had the plans, there are companies that supply works, but you first have to know exact size.

[Ross]

You can order online from Rockler to have items shipped directly to you.

[Ross]

Did you get to Rockler and was there any clamp racks you liked?