Making drawer cabinets – WITHOUT DRAWERS
Starring
Pedulla Studio
This workbench has been made from MDF and Tasmanian Oak. Please keep in mind that the processes in this bench have been rushed due to my time constrains, meaning I made some quick design decisions and was not sticking to standard building practices. Including glue drying times. Some of the parts I glued up, especially the Tasmanian oak to the front of the first bench to help level it back out, was not fully cured when I trimmed it down. It had been drying for approx. 4 hours as I attended to other parts of the build like painting etc. In a better situation where I would have had more time, I would have let this cure for more than 24 hours due to the stresses. But the screws did a good job keeping everything together.
Making drawer cabinets – WITHOUT DRAWERS
This workbench has been made from MDF and Tasmanian Oak. Please keep in mind that the processes in this bench have been rushed due to…
This Wood Isn’t Normal
This Walnut Sculpted Desk was designed specifically for two of my favourite clients. The main request was to have an elegant minimalist desk but with…
A New Type of Dovetail
This Roubo Workbench is one of the most complex pieces Ive ever made and by no means was that intentional. I though it would be…
Bending Wood into Impossible Shapes
This Bed is made from Walnut and is designed to suit a queen sized mattress. The intention behind the headboard design was to create a…
Making a 10 seater Oak Dining Table
This Dining Table measures 3000 x 1000 x 760mm and is made from White Oak. As you could probably tell from this video, the weight…
WOODWORKING //The best advice I was ever given
This Leaf Hall Table was built using Walnut and Plantation Oak which is essentially Tasmanian Oak grown in a sustainably controlled environment. I’ve used copper…
Only One Of These Will Ever Exist
This Sculpted Coffee table is made from Tasmanian Blackwood and uses a technique called Stacked Lamination which is the process of stacking wood on top…
Inlays = PROFIT
Made From White Oak, this low lying entertainment unit was designed for a client that has specific size requirements, not only for the room itself…
Wood Isn’t Supposed To Do This!
This Bench Seat is made from solid American Ash. The main seat structure uses a technique called stacked lamination to build up a solid foundation…
Simple Joinery You’ve Never Seen Before
This Bench Seat is made from Tasmanian Oak and has been designed specifically for a client of mine. The finish used is Fiddes Oil- Satin.…